Graphtec Blade Holder For CB15 Series Blades Size_c_60" to 69" Simply suction the stone then

Simply suction the stone then place it onto the desired decorating surface for the glue fix

The press can draw down or swing open

S43 Alcohol Developed Plate Specifications:

Flame Width 200mm  Combustions Gas Standard petrolic gas/ propane Combustions-supporting Gas Compressed air with pressure 8KGF/cm2 (80-90 psi) Power Supply 220V/50Hz Conveyor Size 1800 x 360mm  Conveyor Speed 0-10m/min (0-30 ft

) /Shipping weight 800lbs

Graphtec Blade Holder For CB15 Series Blades Size_c_60" to 69" Simply suction the stone thenCompatible with blades: CB15U, CB15U K30*, CB15U, CB15UA, CB15U K301. 5mm** Blade holder with a red top, and brass tip for CB15 blades. These brass tip blade holders plungers are more rigid and lend to more accurate cutting. NOTE: Remove CB15 SP Blade spring before installing into this Blade holder. DO NOT install any blade spring.