T&E Tools Coolant Evacuator TGPS12070B19TL • Excellent rust / corrosion

• Excellent rust / corrosion protection

Fuel consumption (g/(kw

be sure it'll fit under the hood

Hanging hole at end of handle: wrenches stored on panel or hung to avoid loss or fall

Holder Size: 4 x 3/4 x 1/2 inch (100 x 19 x 13mm) Knurl Dimension: 3/4 x 1/4 x 1/4 inch (19 x 6

T&E Tools Coolant Evacuator TGPS12070B19TL • Excellent rust / corrosionCoolant Evacuator & System Tester After draining the radiator the tester will evacuate all the air from the system. Within two to three minutes the gauge will read that vacuum is held and there are no leaks. Coolant then can be refilled into the coolant system without creating any air locks. Supplied with interchangeable sleeves and tapered cones to fit all radiator necks. Gauge Diameter: 38mm (1. 1 2") Length: 165mm (6. 1 2")